Loading The Bottom Rack - Thermador DWHD43C Manual De Uso Y Cuidado

Ocultar thumbs Ver también para DWHD43C:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Preparing and Loading the Dishware

Loading the Bottom Rack

Place large items in the bottom rack. Load pots
and pans upside-down. Figures 6 and 7 show
typical mixed loads for the bottom rack.
12 place setting
6
Figure 6
Figure 7
(continued)
Loading Extra Tall Items
If an item is too tall to be placed into the bottom
rack even with the top rack in the raised position,
remove the empty top rack by pulling it out of the
dishwasher until it stops rolling.
Pull the front of the rack upward and outward until
the rollers are completely free of the roller guides.
Set the top rack aside.
Push the roller guides back into the dishwasher.
Insert the Extra Tall Item Sprinkler into the top rack
spray outlet and turn the sprinkler clockwise to
lock it into position as shown in Figure 8.
NOTE : Keep the vent on the tub's right side clear
by placing tall items such as plastic cutting
boards and tall baking sheets on the bottom
rack's left side, center, or back.
Figure 8

Publicidad

Tabla de contenido
loading

Tabla de contenido