Publicidad
412016*
1
402053
403022*
q
301016*
EMD08010
SHALLOW WATER LEVER
(If equipped)
Lifting this lever will tilt the motor up par-
tially to provide more clearance when
operating in shallow water.
EMD44010
TILT LOCK MECHANISM
(for Manual tilt model)
The tilt-lock mechanism is used to prevent
reverse thrust from the propeller lifting the
outboard motor when reversing. To lock
it, set the tilt-lock lever in the up position.
To release it, push the tilt-lock lever down.
1 Tilt-lock lever
EMD47010
TILT SUPPORT KNOB
To keep the outboard motor in the tilted-
up position, push the tilt support knob
under the swivel bracket.
EMD62011
TOP COWLING LOCK LEVER
To remove the engine top cowling, turn
the lock lever. Then lift off the cowling.
When replacing the cowling, check to be
sure it fits properly in the rubber seal.
Then lock the cowling again by moving
the lever upward.
1 Top cowling lock lever
2-13
GB
Publicidad
