Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning & Maintenance
Change the door's direction
If you need to reverse the door hinges on opposite sides, it is recommended that you contact the autho-
rised service centre in your area to perform this operation or ask a technician for assistance.
Before reversing the doors, make sure that the appliance is unplugged and empty. It is recommended to
use a Phillips screwdriver and a spanner (both not supplied).
1. Remove the top hinge cover from the top of
the appliance. Unscrew the three screws and
remove the top hinge.
2. Lift the freezer door and place it on a padded sur-
face to avoid scratches.
3. Remove the screws from the centre hinge
and then remove it. Lift the refrigerator door
and place it on a padded surface to prevent
scratching.
4. Remove the screws and the bottom hinge with adjustable feet
from the bottom of the appliance. Unscrew and remove the bottom
hinge pin, rotate the bracket on it and replace it. Replace the bracket
with the bottom hinge pin. Replace the two adjustable feet.
5. Remove the hinge pin at the bottom of the refrigerator and freezer
door. On the other side of the refrigerator and freezer door, insert the
replacement hinge pin supplied with the appliance.
6. Place the refrigerator door on the appliance, making sure that the
lower hinge shaft of the hinge is inserted into the lower hole of the re-
frigerator door. Screw the centre hinge back into place on the opposite
side.
7. Place the freezer door on the appliance, making sure that the central
axis of the hinge is inserted into the bottom hole of the freezer door.
8. Fit the top hinge to the top panel of the appliance
and tighten the screws. Fit the screw hole cover and
the top hinge cover.
31
English
infiniton.es
Publicidad
