JVC GR-AX827 Manual De Instrucciones página 20

20
F1 F2
Function SEL.
Focusing
Auto Focus
Focus
The camcorder's Full Range AF system offers continuous
detection zone
shooting ability from close-up to infinity. However,
correct focus may not be obtainable in the situations
listed below (in these cases use manual focusing):
•When two subjects overlap in the same scene.
•When illumination is low.*
•When the subject has no contrast (difference in
brightness and darkness), such as a flat, one-color wall,
or a clear, blue sky.*
•When a dark object is barely visible in the viewfinder.*
•When the scene contains minute patterns or identical
patterns that are regularly repeated.
* The low-contrast warning "
viewfinder.
Focus Lock
This feature locks the focus in place, which is especially
helpful in the following situations:
•When things pass between your subject and the
camcorder. Engage the focus lock function to lock your
subject in before recording.
•When you want your subject to be focused, and to
appear in a corner of the screen. First, center on the
subject and focus using auto focus mode. Then engage
the focus lock function and move the camcorder until
the subject is where you want it.
1
2
3
NOTES:
If the lens is smeared or blurred, accurate focusing is
not possible. Keep the lens clean, wiping with a piece
of soft cloth if it gets dirty. When condensation occurs,
wipe with a soft cloth or wait for it to dry naturally.
When shooting a subject close to the lens, zoom-out
first (
the camcorder could automatically zoom out
depending on the distance between the camcorder and
the subject.
RECORDING
Advanced Features
SELECT MODE
Press Function SEL. repeatedly until "FOCUS"
appears to the right of F1.
LOCK FOCUS
Press F1. The focus lock indication "
in the viewfinder.
RELEASE FOCUS LOCK
Press F1. Focus lock is immediately released. The
focus lock indication disappears.
pg. 15). If zoomed-in in the auto focus mode,
" appears in the
" appears