Getting Started; Power - JVC GR-AX827 Manual De Instrucciones

8
CHG. (charge) indicator

POWER

indicator
END
indicator
REFRESH switch
Hook on.
BATT. RELEASE
**REFRESH
The AC power adapter features a REFRESH
function that allows you to fully discharge the
battery pack before recharging.
To discharge the battery . . .
.... attach the battery pack to the adapter as
shown in the illustration to the left. Then
push REFRESH. The REFRESH indicator
lights when discharging starts, and goes
out when discharging is complete.
Power
This camcorder's 3-way power supply system lets you
choose the most appropriate source of power.
NOTES:
No function is available without power supply.
Use only specified power supply.
Do not use provided power supply units with other equipment.
CHARGING THE BATTERY PACK
Marks
1
To AC outlet
2
3
REFRESH indicator BATT. PACK
BN-V12U
BN-V22U
BN-V25U
USING THE BATTERY PACK
1
2
Push in.
RECORDING TIME
BATT. PACK
BN-V12U
BN-V22U
BN-V25U
( ): when the video light is on (GR-AX827/AX627 only).

GETTING STARTED

SUPPLY POWER
Connect the charger's AC power cord to a wall
outlet. The power indicator lights.
ATTACH BATTERY PACK
Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.
The CHG. indicator lights.
DETACH BATTERY PACK
When charging is completed, the END indicator
lights. Slide the battery pack opposite the direction
of the arrow.
CHARGE
approx. 1 hr. 10 min.
approx. 2 hrs. 10 min.
approx. 2 hrs. 40 min.
ATTACH BATTERY PACK
Hook its top end to the camcorder and push the
battery pack in until it locks in place.
DETACH BATTERY PACK
Slide BATT. RELEASE and pull out the battery pack.
GR-AX627/AX527
approx. 1 hr. 5 min.
(35 min.)
approx. 2 hrs. 15 min.
(1hr. 25 min.)
approx. 3 hrs.
(1hr. 50 min.)
DISCHARGE
approx.
3 hrs. 30 min.
approx. 7 hrs.
approx. 10 hrs.
GR-AX827/AX727
approx. 1 hr.
(35 min.)
approx. 2 hrs. 10 min.
(1 hr. 20 min.)
approx. 2 hrs. 50 min.
(1 hr. 50 min.)