Publicidad
Idiomas disponibles
Idiomas disponibles
5 Mounting
5.3
Mount device with connecting flange
Aids
Material
Requirements:
•
The mounting hole is drilled into the duct wall.
Procedure:
1. Glue the rubber seal (2) to the
duct wall (1) centered in front of
the mounting hole.
2. Attach the connecting flange (3)
centered in front of the mount-
ing hole using the socket button
self-tapping screws (4).
3. Insert the probe into the con-
necting flange.
16
Cross-headed screwdriver
Hex key wrench size 5
Connecting flange
Rubber seal, self-adhesive
4 socket button self-tapping screws 3.5 × 13
Publicidad
