Publicidad
Idiomas disponibles
Idiomas disponibles
10
Shutdown
10.1
Dismounting
Aids
Requirements:
•
The system has been de-energized and secured against being switched on again.
Procedure:
1. Loosen the quick-release screws on the housing front.
2. Remove the housing front and place it down, taking care to protect it from pollutants.
3. Disconnect the electrical connection.
4. Loosen the fastening screws on the housing rear or the connecting flange.
5. Remove the housing rear or the flange.
10.2
Returns
Procedure:
1. The
supplementary sheet for product returns
close it with the shipping documents and attach it to the packaging, ideally on the outside.
2. Use the original packaging or a suitably secure container for sending the device.
10.3
Disposal
DISPOSAL
•
Do not dispose of the device or replaced parts in the trash after use.
•
Delete programs and data stored on the device.
•
Remove batteries, if any, if this can be done without damaging the device.
•
Dispose of the device and the packaging material in a responsible and environmentally friendly man-
ner.
•
Observe the country-specific laws and regulations for waste treatment and disposal.
In accordance with Directive 2012/19/EU on Waste from Electrical and Electronic Equipment, manufac-
turers are obliged to offer the option of returning waste equipment. Request the return from the manu-
facturer.
Screwdriver
must first be completed correctly and signed. Then en-
10 Shutdown
25
Publicidad
