Publicidad
Idiomas disponibles
Idiomas disponibles
ACCESSORY A DAPTOR
•
5.6 Align the H0seJHandle Assembly
(G) with
Accessopj Adaptor (H) on the end fitted with the
corresponding attachment,
Accessory
adaptor
can also be attached to the extension
wand if
longer reach is needed.
•
Slide
the Accessory
Adaptor
over
the
Hose
Handle Assembly until you hear a click.
•
UseAccessory
Adaptor to attach various different
accessories
depending
on
the task
to be
performed.
•
To attach accessories,
fit accessory over nozzle
tip, aligning
arrows
on
tip with
arrows
on
accessory
(5.7). Rotate quarter turn clockwise
to lock,
•
To disinfect and kill 99.9% of harmful bacteria,
use steam cleaner without tools and attachments,
•
Fill the solution
tank with the Hoover _ Multi-
Purpose Disinfectant as directed in "Removing and
Filling Solution Tank" section on page 7, Turn Clean
Control(qM)
dial to HIGH. Hold steam nozzle 6-8"
from surface, Spray for 10 seconds and allow to sit
for 1 minute.
USING ON CARPET
•
Attach
Multi-Surfaca
Micmfiber
Pad.
Plug in
and press the power button on the steamer.
•
Place the steamer into the carpet glider (5,8),
•
To recline
the
steamer
place foot
on floor
head and tilt handle (5,9).
•
To produce steam squeeze the trigger (5.t0),
•
Move
the mop head slowly
backwards
and
forwards
across
the
floor
(5,1t)
paying
particular
attention
to high traffic
areas.
AFTER STEAMER
USE / USING COOLING BASE
•
After
using mop head and to avoid damage
to your floors,
unplug and
place mop head in cooling
base (5.12) until product
cools, Once steamer
is cooled,
remove
steam
pad and follow
=how to clean"
instructions
in
Microfiber
pad section on page 12 to avoid
mold and mildew,
10
Publicidad
