Descargar Imprimir esta página

Akai AM-U61 Manual Del Usuario página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

OPERATIONS
PLAYBACK
On
On: Speakers
-Both off: Headphones
DC
STEREO
INTEGRATED
AMPLIFIER
USsi
Set as desired
Record playback
Radio reception
Set as desired
BEFORE OPERATION
@ MODE selector
...............
STEREO
( @)
®@® Tonecontrols
...........00005
DEFEAT
@
LINE STRAIGHT switch.........
off
@® MUTING
and LOUDNESS buttons. . released
® SUBSONIC switch.............
OFF ( m)
®
BALANCE control
............
centre
@
VOLUME
control
.............
low
@
RECSELECTOR..............
OFF
@ SPEAKERS switches
...........
A and/or B
headphones: both off
Playback of source
Set
connected to AUX
according
jacks
to cartridge.
TAPE 2 playback
TAPE 1 playback
DEPRESS THE POWER SWITCH TO TURN ON THE POWER.
@ RECORD
PLAYBACK
PHONO Selector.........0-200000- MC/33/47/100
1. Turn on the PHONO switch.
2. Set the turntable to playback mode.
3. Adjust the VOLUME, BALANCE,
BASS and TREBLE con-
trols.
4. Depress the SUBSONIC and LINE STRAIGHT switches and
the LOUDNESS
and MUTING
buttons as desired.
CAUTION:
Do not connect
a crystal or ceramic type car-
tridge turntable to the PHONO jacks. When using
this type of turntable, employ the AUX
jacks and
depress the AUX switch.
*
When
a PHONO
ground
line is available, connect to the
Ground (-7}7) terminal.
*
Avoid
placing the turntable too close to the speaker sys-
tem. If placed too close, transmission of vibration from the
speakers will cause howling.
*
Confirm
that the connections are complete and that the
thickness of wire is sufficient. Incorrect or incomplete wir-
ing is, in some cases, the cause of hum.
TROUBLE SHOOTING
HUM OR BUZZ WHEN PLAYING
RECORDS
* Check for correct grounding.
POOR TONALITY OR NOISY SOUND
WN
©
& WN
RADIO RECEPTION
. Turn on the TUNER
switch.
. Set the tuner to receive FM or AM
broadcast.
. Adjust the VOLUME, BALANCE, BASS and TREBLE cc
trols.
. Depress the SUBSONIC and LINE STRAIGHT switches ai
the LOUDNESS
and MUTING
buttons as desired.
TAPE PLAYBACK
. Turn
on
the TAPE-1
or -2 switch
depending
on the ta
deck to be played back.
. Set the tape deck to playback mode.
. Adjust the VOLUME, BALANCE, BASS and TREBLE cc
trols.
. Depress the SUBSONIC and LINE STRAIGHT switches ai
the LOUDNESS and MUTING
buttons as desired.
The AUX
jacks can also be used for playback.
In such
case, connect
the AUX
jacks to the tape deck's outp
(LINE OUT) jacks and turn on the AUX switch.

Publicidad

loading