Publicidad
Idiomas disponibles
Idiomas disponibles
OPTIONAL ACCESSORIES
STACKING KIT
This stacking kit includes:
• Two (2) side rails
• One (1) front rail
• Four (4) screws
Tools Needed
for Installation:
• Phillips-head screwdriver
To ensure safe and secure installation, please
observe the following instructions.
WARNING
• incorrect installation can cause serious
accidents.
• The weight of the dryer and the height of
installation make this stacking
procedure
too risky for one person. Two or more
people are required when installing the
stacking
kit. There is a risk of serious back
injury or other injuries.
• Do not use the stacking
kit with a gas dryer
in potentially unstable conditions
such as a
mobile home. Failure to follow this warning can
result in serious injury.
• Place the washer on a solid, stable, level
floor capable of supporting
the weight of
both appliances.
Failure to follow this warning
can result in serious injury.
• Do NOT stack the washer on top of the dryer.
Failure to follow this warning can result in
serious injury.
• if appliances
are already installed,
disconnect them from all power, water, or
gas lines and from draining
or venting
connections.
Failure to do so can result in
electrical shock, fire, explosion, or death.
STACKING KIT INSTALLATION
36
Make sure the surface of the washer is clean
and dry. Remove paper backing from the
tape on one of the stacking kit side brackets.
press the adhesive area of the bracket to the
washer surface. Secure the side bracket to
the washer with a screw on the back side of
the bracket. Repeat steps 1 and 2 to attach
the other side bracket.
Publicidad
