Publicidad
Idiomas disponibles
Idiomas disponibles
Using t heControls- Auto Dry Models
Select Temperature
In order to select the correct temperature,
turn the
Temperature
control to one of four choices; Regular,
Medium
(select models}, Delicate or Air Fluff.
Regular
Sturdy cottons or labels marked
Tumble Dry.
Medium
For wrinkle-free/permanent
press
(select models}
synthetics and lightweight
cottons
labeled Tumble Dry Medium.
Delicate
For heat sensitive items labeled
Tumble Dry Low or Tumble Dry
Medium.
Air Fluff
Items which need freshening.
Load tumbles with room
temperature
air.
Select Options
End of Cycle Signal
When the cycle is complete, a signal will sound. The
signal can be canceled by turning the switch to Off.
Remove load immediately
to reduce wrinkling.
Extended
Tumble
(select models)
Extended Tumble is provided to minimize wrinkles
in
the Auto Dry No Iron Fabrics cycle. This feature
provides an extra 60 minutes of unheated tumble
action at the end of the cycle. Clothes can be removed
any time during this portion of the cycle.
The additional
60 minutes of unheated tumbling
can
be canceled by turning
the switch to Off.
H_aW
Duty
+ SupBr
C_paci_y
P_us = _oPBour_d I = m'cm
Delicate
Medium
Air Fluff
Regular
Off
Select Cycle
To select a cycle, rotate the control dial to the desired
setting. When using an Auto Dry Regular cycle, the
control dial should point between More Dry and Less
Dry for most loads.
Loads of larger or bulkier size may require the More
Dry setting to completely
dry the load. The Less Dry
setting is best suited for lightweight
fabrics or for
leaving some moisture in the clothing
at the end of the
cycle.
Auto Dry Regular
The Auto Dry Regular cycle is designed to dry most
cottons and linens. At the end of the cycle, the clothes
are cooled to reduce wrinkling
for approximately
10 minutes.
Auto Dry No Iron Fabrics
The Auto Dry No Iron Fabrics cycle is designed to dry
wrinkle-free
cottons, synthetic
fabrics, double knits and
permanent
press fabrics automatically.
At the end of
the cycle, the clothes are cooled for approximately
10
minutes to reduce wrinkling.
If the load is not removed
from the dryer and Extended
Tumble (select models}
has been selected, the cycle will advance to Extended
Tumble which provides additional
unheated tumbling
time. (See Step 2}.
Publicidad
