Philips MZ-3 Manual De Instrucciones página 8

TIMER/ SLEEP
5 Press TIMER or PROGRAM again.
™ The clock digits for the minutes flash.
6 Turn VOLUME to set the minutes: clockwise for minutes
up; anti-clockwise for minutes down.
7 Press TIMER or PROGRAM to confirm the time.
– The timer is now set and activated.
Display shows N.
Activating and deactivating TIMER
Press either:
• on the remote control,
TIMER during playback or in standby mode.
• on the set,
PROGRAM in standby mode.
™ Display shows N if activated, and disappears if
deactivated.
Activating and deactivating SLEEP
The sleep timer enables the unit to switch off by itself after
a set period of time. The clock time needs to be set first
before the sleep timer can be used.
• During playback to select and activate your desired
sleep time, press SLEEP on the remote control once or
more.
™ Display shows SLEEP and one of the sleep time
options in sequence: 60, 45, 30, 15, SLEEP
OFF, 60...
• To deactivate, press SLEEP on the remote control once
or more until SLEEP OFF is shown, or press to
standby on the set or remote control.
™ SLEEP disappears from the display.
8
CD PLAYER
MC 158 COM MC 158 COM
PAC T AUD IO PAC T AUD IO
IO IO SYS TEM SYS TEM
IO IO
IO IO
II II CD
DBB
SHUFF LE
IO IO PROGR AM
II II
IO IO
II II
IO IO
II II
IO IO
IO IO
I II I II
Playing a CD
This CD player plays Audio Discs including CD-Recordables
and CD-Rewritables.
• CD-ROM, CD-I, CDV, VCD, DVD, MP3 or computer CDs,
however, are not possible.
1 Select CD source.
2 Press OPEN/CLOSE to open the CD tray.
™ OPEN is displayed when you open the CD
compartment.
3 Insert a CD with the printed side facing up and press
down on OPEN/CLOSE to close the CD tray.
™ READ is displayed as the CD player scans the
contents of a CD, and then the total number of tracks
and playing time are shown.
™ NO DISC is displayed if you have inserted no
disc.
™ DISC NOT READABLEscrolls across the
display if you insert a CD incorrectly or a non
finalised CD-R(W).
4 Press 2; to start playback.
™ Current track number and elapsed playing time of the
track are displayed during CD playback.
5 To interrupt playback press 2; . Press 2; again to
OPEN OPEN
CLOSE CLOSE
resume playback.
™ The display freezes and the elapsed playing time
PRESET PRESET
flashes when playback is interrupted.
TUNING TUNING
6 To stop CD playback, press 9.
Note: CD play will also stop when:
– the CD tray is opened;
– the CD has reached the end;
– you select another source: TAPE, CD R or AUX.
Selecting a different track
• Press ¡1 or 2™ on the set, (on the remote control
¡ or ™) once or repeatedly until the desired track
number appears in the display.
• If you have selected a track number shortly after loading
a CD or in the PAUSE position, you will need to press
2; to start playback.
Finding a passage within a track
1 Press and hold down on ¡1 or 2™ (on the remote
control 11 or 22 ).
– The CD is played at high speed and low volume.
2 When you recognize the passage you want,
release 11 or 22.
– Normal playback continues.
Note: During a CD programme or if SHUFFLE/ REPEAT acti-
ve, searching is only possible within the same track.