TrekStor DataStation pocket capa 3.0 Manual De Instrucciones página 11

• Should the supplied USB 3.0 cable not be at hand, you can also transfer data to All manuals and user guides at all-guides.com
a computer via a suitable USB 2.0 cable. In this case, the maximum data transfer
speed will be that of USB 2.0, even if you connect your DataStation to a USB 3.0
port of your computer. The possible data transfer rate is always limited by the
weakest link in the connection chain!
• A USB 3.0 hub offers separate connections for USB 3.0 and USB 2.0 devices.
Therefore make sure that you use a USB 3.0 port if you connect your DataStation to
a USB 3.0 hub.
• If you use a USB 2.0 hub, you will only be able to achieve the data transfer rate of
USB 2.0!
1) Connecting the DataStation
a) Connect the USB 3.0 port of your DataStation with a USB 3.0 port of your
computer. Please use only the provided USB 3.0 cable.
Thanks to the downward compatibility of USB 3.0 you can also connect your
i
DataStation to a USB 2.0 or USB 1.1 port of your computer. In this case, you will not
be able to benefit from the higher data transfer rate that you can get when you
connect the DataStation via USB 3.0. When connecting via an older USB standard,
please also use the provided USB 3.0 cable.
b) Your operating system automatically recognizes the DataStation and adds the
DataStation as a "l
Windows) or "D
If you want to disconnect your DataStation
a
from your computer, first log off, as
described in these instructions, to safely
remove the drive and prevent data loss.
D " (or "l
oCAl isk oCAl
" (Mac® OS X and Linux®).
esktop
D ") to "m C
rive y omputer
"/"C " (Microsoft®
omputer
11
EN