Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
SOLUTION
The fuel tank is empty
Fill the fuel tank with properly mixed fuel
The engine is flooded
The spark plug is not working properly
The air filter is dirty
The idle speed is incorrect
The fuel is old (over 30 days) and/or improperly mixed
The fuel is old (over 30 days) and/or improperly mixed
The spark plug is not working properly
The saw chain tension is too tight
The guide bar groove and oil passages are dirty
The saw chain tension is too tight
The guide bar and saw chain are damaged
The chain brake is engaged
The saw chain is dull
Move the choke knob to Position 2, press the throttle lockout,
squeeze the throttle control and pull the starter rope
Refer to Maintaining the Spark Plug
Clean or replace the air filter
Adjust the idle speed
Drain the fuel tank and add fresh, properly mixed fuel
Drain the fuel tank and add fresh, properly mixed fuel
Refer to Maintaining the Spark Plug
Adjust the saw chain tension
Clean the guide bar and oil passages
Adjust the saw chain tension
inspect the guide bar and saw chain for damage. Replace them if
necessary
Disengage
the chain brake
Sharpen
or replace
the saw chain
28
Publicidad
