Publicidad
Idiomas disponibles
Idiomas disponibles
Read these instructions thoroughly before beginning
work. Please leave instructions for customers.
These instruction contain maintenance and warranty
information.
If necessary, remove the existing toilet.
IMPORTANT!
Due to the powerful performance of our Cyclone, G-Max,
E-Max and Power
installing these toilets in a back-to-back situation is when the
toilet drain
contact your builder or contractor prior to this installation.
check the dimensions below:
bolt should be inserted into the slot with its head down and
threaded shank pointed upward.
2) Carefully turn the toilet upside down on some padding. Firmly
press a new wax seal (not supplied) onto the circular recess
around the outlet opening. Turn the toilet upright and gently
seat wax seal.
CAUTION: Do not move toilet after the wax seal is set.
3) Insert the cap base, washer and thread nuts onto the bolts and
hand tighten. Then tighten the bolts an additional ½ turn. Install
the bolt caps. (see Ill. 2).
NOTE:
has the correct side up indicated by THIS END UP (THIS PART
UP). Or check for interference of the mounting bolt with the cap.
WARNING! Do not over-tighten the nuts. Damage to china or
plastic parts may result.
BEFORE INSTALLATION
INSTALLATION PROCEDURE
Double Combination WYE / 1/8 Bend
Double Sanitary Tee / Sanitary Cross
Supply Valve
Wall
12"
Ill. 1
Ill. 2
3
YES
NO
* Recommended
minimum
requirement.
C/L
Closet
Flange
C/L
Publicidad
