CyberHome DVR 1600 Manual Del Usuario página 22

Scheduled Timer Recordings
Setting Beginning and Ending Times
By default, the START and END times are set to the
current time and one hour later, respectively. The
START and END dates are set to the current date.
To change a time or date field, use the 5 /6 and
3 /4 keys to navigate the screen. To select a field
to change, press ENTER.
A
[ :00 PM 1
With Time fields, select the 10's or l's digit to
change, with increments of 10 minutes or 1 minute,
respectively.
A
[ 08:0DpM ]
v
Press ENTER to save your changes and exit edit
mode for the current field.
5
Next, select an input source or TV channel to record
from with the 3 /4 keys. For TV channels, use the
number keys to specify your selection.
[ Vidool, ]
The Recurrence setting indicates when the scheduled
recording will take place or repeat.
ONCE (No Repeat) - One time recording, specify a
Time, Date, etc. This event is deleted after the recording
DAILY - The recording is repeated every day and the
date setting is ignored.
WEEKLY - The recording is repeated once each week
on the day specified in the START and END times.
Select Recurrence option with the 3 /4 keys.
a
Setting the Quality Mode
Specify' the Recording Quality mode you wish to use
for the recording with the 3 /4 keys.
[ HQ(lhou0 _ J
Saving the Schedule
Select ADD and press ENTER to add the entry to
the schedule list when all parameters are set.
To Cancel adding a new schedule, use 4 to move
to the CANCEL field and press ENTER.
To exit the Schedule Screen, SCHEDULE.
press
Editing a Saved Schedule
To change a recording schedule, press the
SCHEDULE key to access the Schedule Screen.
Schedule 28 Feb 2006 - 08:00PM
2 Wed ° 10:30A_V! 01:00 Svideo Ready
Use the 5 /6 keys to select the entry you wish to
edit.
Use the3 /4 keys to select the EDiT RECORDING
icon and press ENTER.
Edit the schedule's settings with the same
procedure outlined earlier for new recordings.
Exit the Schedule Screen at any time by pressing
SCHEDULE.
Suspending t Activating a Schedule
Temporarily suspend a recording schedule and then
enable it again with the Schedule Screen's Action Menu.
Press SCHEDULE to access the Schedule Menu.
Use the 5 /6 keys to select the entry you wish to
suspend or activate.
If the schedule you selected is currently enabled,
the SUSPEND icon is shown. Use the 3 /4 keys to
select it and press ENTER to disable the schedule.
Notice the icon to the left of the schedule number.
The STATUS will also change to SUSPEND.
To activate a suspended event, select this icon with
the 3 /4 keys and press ENTER.
The icon to the left of the schedule disappears and
the STATUS displays READY.
Deleting a Saved Schedule
I Press SCHEDULE to access the Schedule Menu.
Use the 5 /6 keys to select the entry you wish to
delete.
Use the3 /4 keys to select the DELETE icon and
press ENTER.
Press SCHEDULE to exit the Schedule Screen.
21