Publicidad
Idiomas disponibles
Idiomas disponibles
TV Shape
(Aspect
Ratio)
Default setting: 4:3 Pan Scan
By default, this option is set for norma! TVs with 4:3
aspect ratio. Unless you're sure you have a
WUDESCREEN TV, do not change this setting. The 4:3
Letter Box setting is meant to enaMe the "Letterbox"
view on DVDs that contain both Letterbox and Pan/Scan
versions.ff you are using a wide screen TV, set this
option to 16:9 to match the aspect ratio of your TV.
Use the 3 /4 keys to select an option.
Press SETUP
to exit.
Standard
Output
DefauLt setting: NTSC
Your DVD Player will work with TVs based on the NTSC.
NTSC is the standard TV system in the USA and others.
Scan
Mode
Default
setting:
Interlace
Normal
TVs scan onry in "interlaced"
mode,
because
the
odd and even [ines are interlaced
together
in alternate
scans.
Progressive
Scan is a scanning
method
offered
on high-end
Tvs.
Caution
Do not change the Scan Mode setting unless you are
sure that your TV supports Progressive Scan.
ff
have a P-SCAN TV, use the4 key to change
you
the scan mode to Progressive.
A notification wil!
appear, if you do not have P-SCAN TV, the picture
will be restored to your previous setting.
Notification
©
Changing
the scan
mode
can
resu0t in
loss
of picture,
ffthe
picture
is not
correct
the setting
wi00 be restored
automatically
after 10 seconds,
[ YeeI[
.o
Press SETUP to exit the VIDEO MENU,
Output
Default setting: S-Video
Your DVD Player will work with televisions supporting
various video inputs including composite, S-Video,
component and Progressive Scan.
1
2
3
When using the composite or S-Video connection,
select S-Video.
If you plan to use the component connection, use
the4 key to change the output to Component.
Press SETUP to exit the VIDEO MENU.
A/V Output
- Picture
Picture
Br,ghtness
[_]
Contraat
Use the 5 /6
to select Brightness or Contrast
keys
and the 3 /4 keys to decrease or increase the
value.
Af'¢ Output
- Audio
Audio
Digita[
output
mode
[4
PCM
]
Dynamic
range
contro0
OFF
]
Digital
Output
Mode
Default setting: RAW
Determines the audio format output by the Optical and
Coaxial Digital Audio Output. When playing a DoIby 5.1
soundtrack, leave the setting on RAW to output the
encoded digital signa! to a Digita! Receiver with a DoIby
5.1 Decoder. If your receiver is not capable of decoding
a Dolby signal, use the PCM setting.
When playing CDs, leave this setting at PCM to output a
stereo signal on the Digital Output.
Use the 3 /4 keys to select an option.
Press SETUP to exit the AUDIO MENU.
Dynamic
Range
Control
Default setting: OFF
Dynamic Range Control, also called "Midnight Mode"
reduces the variations between loud and soft sounds in
DVD movies. This lets you turn the volume up to hear
softer sounds and dialog, and not worry about extremely
loud scenes disturbing others.
Use the 3 /4 keys to select OFF or ON.
Press SETUP to exit the AUDIO MENU.
25
Publicidad
