Descargar Imprimir esta página

Inventronics OSRAM OPTOTRONIC OTi DALI 35/220-240/1A0 NFC TW Instrucciones De Instalación Y Funcionamiento página 8

Publicidad

 Εισαγωγέας: Inventronics Netherlands B.V., Polluxstraat 21, 5047RA Tillburg
 Forgalmazó: Inventronics Netherlands B.V., Polluxstraat 21, 5047RA Tillburg
 Inventronics Poland Sp. z o.o., Al. Jerozolimskie 94, 00-807 Warsaw, Poland
 Inventronics Turkey Teknoloji Ticaret Limited Şirketi, Buyukdere Cad. Bahar Sok. River Plaza No: 13/5 Sisli 34394 Istanbul, Turkey
 Uvoznik: Inventronics Netherlands B.V., Polluxstraat 21, 5047RA Tillburg
 Inventronics Netherlands B.V., Polluxstraat 21, 5047RA Tillburg
 Инвентроникс Нидерландия Б.В., Полукстраат 21, 5047 РА Тилбург
 
WARNING: DALI (FELV) control terminals are not safe to touch. Circuits connected to any DALI (FELV) control terminal shall be insulated for the LV supply
voltage of the control gear, and any terminals connected to the DALI (FELV) circuit shall be protected against accidental contact.
OTI DALI 35 NFC TW, OTI DALI 50 NFC TW classified as "Non IC": The independent LED driver cannot be abutted against or covered by normally flammable materials
or used in installations where building insulation or debris is, or may be, present in normal use. No use for residential installations.
The minimum clearance distance from the top and sides of the independent LED driver to normally flammable building elements is A=B=C=10mm.
Barrier required for loose fill insulation
or loose combustible materials
INVENTRONICS is a licensee of ams OSRAM. OSRAM is a trademark of ams OSRAM.
A
C
C10449058
G15127210
06.11.23
Combustible building element above fitting
Combustible building
B
structural member
Inventronics GmbH
www.inventronicsglobal.com
Berliner Allee 65
86153 Augsburg
Germany

Publicidad

loading

Este manual también es adecuado para:

Osram optotronic oti dali 50/220-240/1a4 nfc tw