Descargar Imprimir esta página

Lenco LS-430BN Manual Del Usuario página 19

Ocultar thumbs Ver también para LS-430BN:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 134
counter-clockwise.
4. Tone Control
4.1. The tone of this turntable could be adjusted by rotating the Tone
Control knob.
4.2. To be a brighter sound, turn the Tone Control knob clockwise.
4.3. To be a deeper sound, turn the Tone Control knob
counter-clockwise.
NOTE:
1.
If the silent pause time between each track is longer than
3 minute, the platter will stop spinning automatically to avoid
damaging the record. The indicator light will be red. To resume
operation, press the START button.
2.
If the felt mat gets dirty, it can easily scratch the record, so remove
the felt mat periodically and wipe off any dust.
3.
To prevent the record from scratches and warping, remove it after
use.
4.
Do not use a disk stabilizer.
AUX-IN Operation
This turntable includes an auxiliary audio signal input jack for
connecting external audio devices like MP3 players, CD players, and
older, non-dockable iPods so you can listen to your external source
through the turntable's speakers.
1.
Use an audio cable (not included) with one 3.5 mm stereo
connection on each end of the cable.
2.
Plug one end into the AUX-IN jack on the turntable and the other
end to the Line Out jack of the audio device.
3.
Power on the turntable and audio device. The indicator light of
turntable is red.
4.
Press the MODE button again, the indicator light of turntable
18

Publicidad

loading

Este manual también es adecuado para:

Ls-440Ls-430Ls-440bubg