Publicidad
Idiomas disponibles
Idiomas disponibles
Install or store unit where it will not be exposed
to temperatures
below freezing or
exposed to outside weather
conditions.
Properly ground washer to conform with all governing codes and ordinances.
To reduce the risk of electric shock, do not install the washer in humid spaces.
The base opening must not be obstructed by carpeting when the washing
machine is installed on a carpeted floor.
In countries where there are areas which may be subject to infestation
by cockroaches
or other vermin, pay
particular attention to keeping the appliance and its surroundings
in clean condition at all times.
Damage caused by cockroaches
or other vermin will not be covered by the appliance warranty.
• Shipping
bolts
The appliance is fitted with shipping bolts to prevent internal damage during transport.
• Removing shipping bolts
4'
1. To prevent internal damage during transport,
4 locking bolts are installed. Before operating
the washer, remove the bolts.
• If they are not removed, it may cause severe
vibration, noise, and malfunction.
3. Take out the 4 bolts by twisting the braces
slightly. Keep the 4 bolts and the wrench for
future use.
• Whenever the appliance is transported, the
shipping bolts must be replaced.
f
2. Unscrew the 4 bolts with the wrench supplied.
cap
4. Close the holes with the caps supplied.
Publicidad
