SPECIFICATIONS
Maximum Pressure
Air Hose Length
DC Cord Length
Power Required
Worklight
Flow Rate
Dimensions
Weight
CAUTION
•
Do not overheat the unit! If the compressor is not pumping a steady
stream of air and appears sluggish or if metal fittings get too warm to
the touch, these are indicators that the compressor has been in operation
for too long. Immediately turn off the compressor and allow it to cool
for approximately 15 minutes before resuming operation. Never leave
compressor unattended while in use.
•
This unit is not suitable for high-pressure tires such as those used on large
commercial trucks.
•
Keep out of reach of children.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
©2022 Wagan Corporation. All Rights Reserved.
120 PSI
24 in.
10 ft
12V 13A DC
4 LED (50 lumens)
10L/minute
3.0 × 6.0 × 7.5 (in.)
1.8 lb
2