STEINEL PROFESSIONAL RC8 Guia Del Usuario página 2

I
CR2032
CR2032
CR2032
CR2032 CR2032
CR2032
CR2032
DE GB FR NL IT ES PT SE DK FI NO GR TR HU
CR2032
CR2032 CR2032 CR2032
CR2032
CR2032 CR2032
3
4
5
CR2032
CR2032
6
CR2032
CR2032
CR2032
CR2032 12
14
15
110099773 09/2023
110099773 BDAL Fernbedienung RC8 2023-09 DL1.indd 2 110099773 BDAL Fernbedienung RC8 2023-09 DL1.indd 2
GB ENGLISH
Principle
The optional remote control for the Presence Control PRO makes larger-scale lighting systems easier to install as it
obviates the need to set each presence detector prior to installation. Any number of Presence Control detectors can
be controlled by remote control. The blue LED on the sensor flashes to indicate each valid press of the button.
Functions
Reach setting (factory setting: 8 m max.)
1
Reach can be set from a minimum of 1 m, 1 / 3, 2 / 3 to a maximum of 8 m by pressing these buttons
(for HF-sensors only).
2 Basic light level (10 %) (factory setting: OFF)
Basic light level deactivated
Basic light level all night
Basic light level for the time shown Time setting CH 1 – stay-'ON' time Switching contact 1 (factory set-
ting: IQ mode)
3 Test mode. The test mode has the purpose of checking for proper working order as well for testing the
detection zone. Irrespective of ambient light level and movement, the presence detector activates the light
to stay 'ON' for approx. 8 sec. Test mode has priority over all other settings. All user-selected settings apply
in normal mode. Test mode ends automatically after 10 min.
4 IQ mode. Stay-'ON' time is self-learning and adjusts dynamically to user behaviour. The optimum time is
determined by means of a learning algorithm. The shortest time is 5 min., the longest time 20 min.
5
Setting the light to stay 'ON' for a time of your own choice. Each press of the button increments the
chosen time setting by 1 minute.
6 The period of time you want the light to stay 'ON' for after last detecting movement can be set from
1
between 5 min., 10 min. to 30 min. by pressing these buttons.
Time setting CH 2 – stay-'ON' time Switching contact 2 (HVAC) (factory setting: 5 min.)
7 The period of time you want light 'ON' for / to stay 'ON' for after last detecting movement can be set
from between 5 min., 10 min. to 15 min. by pressing these buttons.
Time setting CH 2 – Delay (time delay) (factory setting: ON / OFF)
2
8 Room surveillance ON / OFF
Automatic adjustment of switch-'ON' delay after persons are present in the detection zone.
9
No time delay.
7
10
Time delay 10 min.
CR2032
Light threshold setting (factory setting: 5)
8
11
The chosen response threshold can be set from approx. 10 – 1,000 lux.
Examples of use
9 Night-time mode
Corridors, foyers
Stairs, escalators, moving walkways
Washrooms, toilets, switchrooms, canteens
Sales floor, kindergartens, nursery school rooms, sports halls
CR2032
10
Work areas: offices, conference and meeting
rooms, precision assembly activities, kitchens
Working areas requiring good light:
Laboratory, technical drawing, precision work
Daylight mode
12
11 Night mode
Teach-IN. Light level setting using the memory button/Teach mode. This button must be pressed at the
14
level of light at which you want the sensor to respond to movement from now on. The current twilight
13
value is saved.
15 Constant-lighting control (factory setting: ON)
16
ON = blue LED lights up. OFF = blue and red LED light up
16 Automatic or manual mode (factory setting: ON / fully automatic)
ON = blue LED lights up. OFF = blue and red LED light up, manual mode
17
17
Reset
Resets all settings to the values selected on the detector manually or to the factory settings.
Disposal
Electrical and electronic equipment, accessories and packaging must be recycled in an environmentally compatible
CR2032
manner.
Do not dispose of electrical and electronic equipment as domestic waste!
EU countries only: Under the current European Directive on Waste Electrical and Electronic Equipment and its imple-
mentation in national law, electrical and electronic equipment no longer suitable for use must be collected separately
and recycled in an environmentally compatible manner.
Manufacturer's warranty
Manufacturer's warranty of STEINEL GmbH, Diesel strasse 80-84, DE-33442 Herzebrock-Clarholz, Germany
All STEINEL products meet the highest quality standards. For this reason, we, the manufacturer, are pleased to provide
you, the customer, with a warranty under the following terms and conditions:
The warranty covers the absence of deficiencies which are proven to be the result of a material defect or fault in man-
ufacturing and which are reported to us immediately after detection and within the warranty period. The warranty shall
cover all STEINEL Professional products sold and used in Germany.
Our warranty cover for consumers
The provisions below apply to consumers. A consumer is any natural person who, on entering into the purchase trans-
action, neither acts in exercising their commercial nor their self-employed activity.
You can opt for warranty cover in the form of repair or replacement which will be provided free of charge (if applicable,
in the form of a successor model of the same or higher quality) or in the form of a credit note.
In the case of sensors, floodlights, outdoor and indoor lights, the warranty period for the STEINEL Professional product
you have purchased is 5 years in each case from the date on which the product was purchased.
We shall bear the shipping costs but not the transport risks involved in return shipment.
Our warranty cover for entrepreneurs
The provisions below apply to entrepreneurs. Entrepreneur is a natural or legal person or partnership with legal per-
sonality who or which, on entering into the purchase transaction, acts in exercising their or its commercial or self-em-
ployed activity.
We have the option of providing warranty cover by rectifying deficiencies free of charge, replacing a product free of
charge (if applicable, in the form of a successor model of the same or higher quality) or by issuing a credit note.
In the case of sensors, floodlights, outdoor and indoor lights, the warranty period for the STEINEL Professional product
you have purchased is 5 years in each case from the date on which the product was purchased.
Within the scope of warranty cover, we shall not bear your expenses accruing from subsequent fulfillment nor shall we
bear your expenses for removing the defective product and installing a replacement product.
Statutory rights accruing from defects, gratuitousness
The warranty cover described here shall be applicable in addition to the statutory rights of warranty – including spe-
cial consumer protection provisions – and shall not restrict or replace them. Exercising your statutory rights in the event
of defects is gratuitous.
Exemptions from the warranty
All replaceable lamps are expressly excluded from this warranty.
In addition to this, the warranty shall not cover:
− any wear resulting from use or any other natural wear of product parts or any deficiencies in the STEINEL Profes-
sional product that are attributable to wear caused by use or other natural wear,
Brightness settings − any improper or non-intended use of the product or any failure to observe the operating instructions,
− any unauthorised additions, alterations or other modifications to the product or any deficiencies attributable to the
use of accessory,
1
− supplementary or replacement parts which are not genuine STEINEL parts,
2
− any maintenance or care of products that is not carried out in accordance with the operating instructions,
3
− any attachment or installation that is not in accordance with STEINEL's installation instructions,
4
− any damage or loss occurring in transit.
5
Application of German law
The warranty shall be governed by German law excluding the United Nations Convention concerning the Internation-
6
al Sale of Goods (CISG).
Making claims
If you wish to make a warranty claim, please send your product complete and carriage paid with the original receipt
of purchase, which must show the date of purchase and product designation, either to your retailer or directly to us at
STEINEL (UK) Ltd. – 25 Manasty Road, Axis Park, Orton Southgate, GB- Peterborough Cambs PE2 6UP United Kingdom.
13
Daylight mode
For this reason, we recommend that you keep your receipt of purchase in a safe place until the warranty period expires.
G B
1 3 5
Y E A R Y E A R
MANUFACTURER'S MANUFACTURER'S
WARRANTY WARRANTY
Y E A R
MANUFACTURER'S
WARRANTY
11.09.23 08:35 11.09.23 08:35