Publicidad
Idiomas disponibles
Idiomas disponibles
PORTABILITY KIT PART NUMBER: PA0650195
TOOLS REQUIRED: 8mm, 10mm, and 12mm sockets and ratchets, block(s) of wood (minimum of 6" tall).
WHEEL INSTALLATION
1. Block up the alternator end of generator to install wheel kit.
2. Slide axle (item 85) through the wheel bracket on the carrier.
3. Thread M12 nut (item 77) onto the axle and tighten to securely clamp the axle to the carrier.
4. Slide the wheel (item 74) onto the axle.
5. Secure the wheel to the axle with the M10 lock nut (item 86).
6. Repeat above instructions for the remaining wheel.
FOOT INSTALLATION
1. Blocking up the engine side of the generator, assemble the rubber foot (item 73) to the carrier (align with holes in tubing)
using two M6 x 40 bolts (item 78). Thread M6 nuts (item 79) to the bolts to secure the assembly.
2. Repeat above instructions for the remaining foot.
HANDLE INSTALLATION
1. Assemble the handle (items 80, 81, 87 and 88) to the carrier (align with hole in tubing). Thread an M8 nut (item 88) to the
bolt to secure the assembly.
2. Repeat above instructions for the remaining handle.
English
PORTABILITY KIT INSTALLATION
9
Customer Hotline 1-800-445-1805
Publicidad
