Publicidad
Idiomas disponibles
Idiomas disponibles
Ifsituations occur which a renotcov-
ered inthis manual, use care and good
judgment.
Ifyouneed a ssistance,
call
1-800-235-5878.
SPECIAL
NOTICE"
Exposure to vibra-
tions through prolonged
use of gasoline
powered hand tools could cause blood
vessel or nerve damage
in the fingers,
hands, and joints of people prone to cir-
culation disorders or abnormal swellings.
Prolonged use in cold weather has been
linked to blood vessel damage in other-
wise healthy people. If symptoms occur
such as numbness, pain, loss of strength,
change in skin color or texture, or loss of
feeling in the fingers, hands, or joints, dis-
continue
the use of this tool and seek
medical attention. An anti-vibration
sys-
tem does not guarantee the avoidance of
these problems. Users who operate pow-
er tools on a continual and regular basis
must monitor closely their physical condi-
tion and the condition of this unit.
SAVE
THESE
INSTRUCTIONS
CARTON
CONTENTS
Check carton contents
against the fol-
lowing list.
Model 358.792450
• Pruner Attachment
• Shoulder
Strap
• Upper Shoulder
Strap Clamp
• Lower Shoulder
Strap Clamp (with
Spacer Tabs)
• Shoulder
Strap Clamp Screws (2)
• Attachment
Hanger
• Bar Sheath
• Chain Adjustment
Tool (Bar Tool)
• Hex Wrench
• Bar and Chain Oil
Examine parts for damage.
Do not
use damaged
parts.
NOTE:
If you need assistance,
or find
parts missing or damaged,
call
1-800-235-5878.
ASSEMBLY
,_WARNING:
If received
as-
sembled,
repeat all steps to ensure
your unit is properly assembled
and all
fasteners
are secure.
TOOLS REQUIRED
• Hex wrench
(provided)
INSTALLING
PRUNER
ATTACH-
MENT
CAUTION:
When removing or instal-
ling attachments,
place the unit on a
flat surface for stability.
1. Loosen the coupler by turning the
knob counterclockwise.
Coupler
_OOSEN
TIGHTEN
Knob
2.
Remove the shaft cap from the
pruner attachment
(if present).
3.
Position locking/release
button of
attachment
into guide recess of
coupler.
4.
Push the attachment
into the cou-
pler until the locking/release
button
snaps into the primary hole.
5.
Before using the unit, tighten the
knob securely
by turning clock-
wise.
Coupler
Primary Hole
\
/
Guide Recess
PP
Release
Attachment
Shaft
Button
,_WARNING:
Make sure the lock-
ing/release
button is locked in the pri-
mary hole and the knob is securely
tightened
before operating
the unit.
Using the wrong hole could lead to seri-
ous injury or damage to the unit.
Secondary
Hole
Locking/Release
Button in Primary
Hole
SHOULDER
STRAP ASSEMBLY
_WARNING:
Proper shoulder
strap and handle adjustments are re-
quired before use. The shoulder strap
clamp must be installed as shown
above the assist handle on the upper
shaft (powerhead end of unit).
7
Publicidad
