Chronos Manufactures Andre Belfort AB-9012 Instrucciones De Uso página 8

EN
Unscrew the crown by turning it counter-clockwise. Wind the watch by
turning the crown clockwise approximately 30 to 40 turns until the se-
cond hand starts to run. Pull the crown carefully to position 2. Set the
watch to 7 o'clock by turning the crown counter-clockwise. Push the
crown carefully to position 1 and set the day by turning the crown coun-
ter-clockwise. Set the date by turning the crown clockwise. Pull the
crown carefully to position 2 again and set the current time by turning
the crown counter-clockwise. When finished push the crown carefully
back in to place and bolt it by turning it clockwise. For months with less
than 31 days, the date must be changed manually at the end of the
month.
Important! Never set the date and/or the day between 8 pm and 4
am. The date changing mechanism is active in this period and any
exterior intervention can damage the movement. If it is necessary
to set the date during that time period, first change the time to any
time outside it, set the date/day and then reset the correct time.
When the warranty for your watch expires, we recommend you
sending it in for a revision to ensure its longevity. A revision
should optimally be conducted once a year to counteract general
wearout and to maintain the water-resistance of your watch.