Publicidad
Card
Carte
Tarjeta
Washer
End Cap
Cleaning Agitator
Replacing Agitator
Agitator Assembly
Brush Unit
Belt Pulley
- 36 -
➢ ➢ Clean agitator after every five uses
and every time the belt is replaced.
➢ ➢ Remove lower plate.
➢ ➢ Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
➢ ➢ Remove agitator.
➢ ➢ Remove any string or debris located
on the end caps or ball bearings.
➢ ➢ Reinstall agitator and lower plate.
➢ ➢ When the bristles on the agitator are
worn so that they do not touch a card
held across the lower plate, the
agitator should be replaced.
➢ ➢ Remove lower plate and agitator.
➢ ➢ Position belt over belt pulley on the
new brush unit.
➢ ➢ Reinstall agitator and lower plate.
Washer
End Cap
Publicidad
