Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 7
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
Unfold back panel and position as shown. Line up the large
holes in the back panel with the pilot holes in the bottom
support (I). Screw in six screws (4) as shown but do not
tighten. Align back panel with all outer edges and nail (5)
straight down into back edges as shown. Tighten the six
screws (4) now.
ameriwoodhome.com
4
(x6)
#A12210
raw surface
superficie cruda
surface crue
B
5
IMPORTANT! THE BACK PANEL IS A
STRUCTURAL PART OF THIS UNIT AND MUST
BE INSTALLED PROPERLY.
(x24)
#A21110
4
D
17
5
4
I
C
4
You
Tube
Publicidad
