Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Problem
No AC output is available, but
generator is running.
Cause
I.
One of the circuit breakers is
open.
2.
Fault in generator.
3.
Poor connection
or defective
cord set.
4.
Connected
device is bad.
Correction
I.
Reset circuit breaker.
2.
Contact Authorized service
facility.
3.
Check and repair.
4.
Connect another device that is in
good condition.
I.
Short circuit in a connected load.
I.
Disconnect
shorted electrical
Generator
runs good at no-load
load.
but "bogs"
down" when loads are
2.
Generator
is overloaded.
2.
See "Don't Overload
Generator".
connected.
3.
Shorted generator
circuit.
3.
Contact Authorized
service
facility.
Generator
will not start; or starts
Low oil level.
Fill crankcase to proper level or place
and runs rough,
generator on level surface.
I.
Out of gasoline.
I.
Fill fuel tank.
Generator
shuts down during
operation.
2.
Low oil level.
2.
Fill crankcase to proper level or
place generator
on level surface.
Generator
lacks power.
Load is too high.
See "Don't Overload
Generator".
/
14
Publicidad
