GE 22 Serie Manual De Instrucciones página 6

0
iij_iiiiiidiiii
i!iiiii_iiiii_iiiiiii_
iiiiii_iiiiiiii_iiiiim
• €
• m
0
0
_3
0
0
About the shelves and bins.
Not all features are on all models.
Refrigeratorbin
I
Freezerbin
Freezertilt-out bin
Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Large Bins
The larger refrigerator door bins and freezer
tilt-out door bins are adjustable.
To remove: Lift the front of the bin straight
up, then lift up and out.
To replace or relocate: Engage the back side
of the bin in the molded supports of the door.
Then push down on the front of the bin. Bin
will lock in place.
Small Bins
To remove: Lift the front of the bin straight up
then out.
To replace: Positionthe bin above the
rectangular molded supports on the door.
Then slidethe bin down onto the support
to lock it in place.
The snugger helps prevent tipping, spilling
or sliding of small items stored on the door
shelf. Placea finger on either side of the
snugger near the rear and move it back
and forth to fit your needs.
Da not block
CAUTION:
I [
On models with an
ice chute inside the top
freezer door bin, be
careful when plating
items in the bin. Make
sure that items do not
block or fa!! into the ice
chute.
Presstab andpull shelf forward to
remove
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you
to reach items stored behind others. The
special edges are designed to help prevent
spills from dripping to lower shelves.
To remove:
Slidethe shelf out until it reaches the stop,
then press down on the tab and slidethe shelf
straight out.
Toreplace or relocate:
Line the shelf up with the supports and slide
it into place. The shelf can be repositioned
when the door is at 90° or more. To reposition
the shelf,slide the shelf past the stops and
angle downward. Slideshelf down to the
desired position, line up with the supports
and slide into place.
Make sure you push the shelves a!! the way
back in before gou close the door.
6