Virutex AS93 Manual De Instrucciones página 5

4. MILLING HEAD OPERATING INSTRUCTIONS
Fitting the head and adjusting bit outlet
Insert the head into the machine as shown in the figure
(Fig. 2). Turn the lock nut C until it is in the position
which gives the right measurement for the bit and then
tighten it down using the knob.
Setting the support guide and milling height
Unlocking the knob E (Fig. 3) allows the necessary
support guide height to be set using knob F. Once set,
relock with knob E.
5. MAINTENANCE
Brushes and commutator
It is important to change the brushes when they reach
a minimum length of 5 mm. Unscrew the black plug
from the housing and remove the guide carbon brushes.
Replace the carbon brushes with original VIRUTEX brushes
and check that they slide smoothly inside their guides.
Screw on the plug which encloses them and leave the
machine running for some 15 minutes. If the commutator
shows scorching or roughness, it is advisable to have it
repaired by a VIRUTEX technical service centre.
Never use emery paper for this operation.
6. OPTIONAL ACCESSORIES
6727020 1/4" diam. chuck
6027056 8 mm diam. chuck
6650088 Head for fitting hinges with template CPN-66
5000000 PL 11 dove tailing template
7. NOISE AND VIBRATION LEVEL
The noise and vibration levels of this device have been
measured in accordance with European standard EN
60745-2-17 and EN 60745-1 and serve as a basis for com-
parison with other machines with similar applications.
The indicated vibration level has been determined for
the device's main applications and may be used as an
initial value for evaluating the risk presented by expo-
sure to vibrations. However, vibrations may reach levels
that are quite different from the declared value under
other application conditions, with other tools or with
insufficient maintenance of the electrical device or its
accessories, reaching a much higher value as a result
of the work cycle or the manner in which the electrical
device is used.
Therefore, it is necessary to establish safety measures
to protect the user from the effects of vibrations, such
as maintaining both the device and its tools in perfect
condition and organising the duration of work cycles
(such as operating times when the machine is subjected
to loads, and operating times when working with no-load,
in effect, not in use, as reducing the latter may have a
considerable effect upon the overall exposure value).
8. WARRANTY
All Virutex portable electric machines for professional
use are covered by a 12-month warranty from the date
of purchase, without affecting the legal rights of private
non-professional users.
The warranty covers all manufacturing defects, excluding
any damages caused by improper handling or natural
wear and tear of the machine, damages due to connecting
the machine to a different voltage than indicated on
its characteristics plate, and machines that have been
tampered with by unauthorized personnel.
The warranty service will be provided in the country
where the machine was purchased, through the distri-
butor who made the sale.
The purchase invoice indicating the serial number, if
any, must be presented.
1+2 Warranty: In some European Union countries, you
can extend the total warranty to 36 months (including the
initial 12 months), subject to registration on our website.
9. RECYCLING ELECTRICAL EQUIPMENT
Never dispose of electrical equipment with domestic was-
te. Recycle equipment, accessories and packaging in ways
that minimise any adverse effect on the environment.
Comply with the current regulations in your country.
Applicable in the European Union and in European
countries with selective waste collection systems:
If this symbol appears on the product or in the accom-
panying information, at the end of the product's useful
life it must not be disposed of with other domestic waste.
In accordance with European Directive 2002/96/EC, users
may contact the establishment where they purchased the
product or the relevant local authority to find out where
and how they can take the product for environmentally
friendly and safe recycling.
VIRUTEX reserves the right to modify its products
without prior notice.
F R A N Ç A I S
AFFLEUREUSE AS93
1. CARACTÉRISTIQUES TECHNIQUES
Puissance............................................1.100 W
Moteur universel....................................50/60 Hz
5