Publicidad
Idiomas disponibles
Idiomas disponibles
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare
the illustrations
with your unit to familiarize
yourseff with the loca-
tion of the various
controls and adjustments.
Save this manual for future refer-
ence.
Trigger Switch
Assist Handle
Retainer
/
Recessed
Plug
Motor Housing
Air Vents _
_ ......... "'_
Debt s Sh e d _/_if_/
"T'Tri_mmer Head
with 0.080 inch
Trimmer Line
Line Limiter Blade
RECESSED
PLUG
The RECESSED PLUG is used to con-
nect the unit to an extension
cord.
CORD RETAINER
The CORD RETAINER is used to se-
cure the extension
cord to the unit.
TRIGGER
SWITCH
The TRIGGER SWITCH is used to turn
on the unit. Squeeze
the trigger switch
to operate the unit. Release to stop,
LINE LIMITER
BLADE
The LINE LIMITER BLADE cuts the cut-
ting line to the proper cutting length.
ASSIST HANDLE
The ASSIST HANDLE is used to help
hold and guide the unit,
TRIMMER
HEAD
The TRIMMER HEAD holds the cutting
line and rotates during operation.
OPERATING
INSTRUCTIONS
Use only a voltage
supply as specified
on your unit.
SELECT AN EXTENSION
CORD
Extension
Cord Gauge Chart
Length of Cord
Gauge
25 Ft. (7.5 m)
18 Gauge
50 Ft. (15 m)
16 Gauge
100 Ft. (30 m)
16 Gauge
Extension
cords are available
for this
unit at Sears.
Extension
Cord
(16 Gauge)
............
71-85708
ATTACH THE EXTENSION
CORD TO YOUR TRIMMER
Loop your extension
cord through the
handle and around the hook as
shown. Insure the plug and cord are
firmly and fully engaged.
CAUTION:
Failure to use cord retain-
er could result in damage to the unit,
extension
cord, or both.
Cord Retainer
6
Publicidad
