Descargar Imprimir esta página

Samsung RF23HTEDB Manual Del Usuario página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Take out the lower basket ( 2 ) by lifting the
basket up from the rail system.
4. Press the fi xing hook of the rail system.
5. Holding the top of the Freezer Drawer, pull it
out all the way, and then remove it from the rail
system.
CAUTION
Be careful not to scratch or dent the sliding rail by
letting it strike the fl oor.
CAUTION
Make sure that you mount the freezer basket in the
right position when removing / installing the freezer
door. Failing to do so may result in the door not
opening or closing properly.
CAUTION
DA68-02954B-03.indb 15
DA68-02954B-03.indb 15
(2)
(2)
English - 15
RE-ASSEMBLE THE FREEZER
DRAWER
To reattach the drawer after you have moved the
fridge to its fi nal location, assemble the parts in
reverse order.
LEVELING THE REFRIGERATOR
Make sure the refrigerator is level so that you can
make fi nal adjustments.
Use a level to test if the refrigerator is level both
side to side and back to front.
If the refrigerator is not level, you will not be able
to get the doors perfectly even, which may cause
moisture condensation and increased energy bills.
Below is an example of how to level the refrigerator
if the left side of the refrigerator is lower than the
right side.
How to adjust the level
1. Open the freezer drawer and remove the lower
basket.
2. Insert a fl at-blade screwdriver (-) into a notch on
the left control lever, and then turn it counter-
clockwise to level the refrigerator.
(You turn the lever clockwise to lower the
refrigerator and counterclockwise to raise it.)
fl at-blade
Control Lever
screwdriver (-)
screwdriver (-)
2015. 2. 10.
2015. 2. 10.
3:38
3:38

Publicidad

loading