Samsung RF23HTEDB Manual Del Usuario página 23

E-Smart
The E-Smart icon lets you check the status of the
refrigerator's AP connection (network connection).
• When connected to an AP: The E-Smart icon
is on.
• When not connected to an AP: The E-Smart
icon is off.
E-SMART Refrigerator Features
How to get the most out of your E-Smart
refrigerator.
Getting Connected
To use the Smart Grid (Demand Response) and
E-Smart function on your Refrigerator, you need
the following devices and apps:
• Devices: 1) Wireless Router, 2) Samsung
E-Smart Refrigerator, 3) Smartphone
(Recommended: Galaxy S4,Galaxy Note3/
Android OS Jelly bean).
• Applications: 1) "Samsung E-Smart App" from
the Google Play Store or Samsung Apps.
In addition, you need to:
- Connect the Refrigerator and the Smartphone
to the same Wi-Fi network in your home.
- Install and run Samsung E-Smart App on your
Smartphone (to use the Samsung E-Smart
function).
In addition, to use the Smart Grid (Demand
Response) function, you must Register for the
service with your electric company.
The company must have an EMS (Energy
Management System) that supports SEP (Smart
Energy profi le).
Downloading the E-Smart App and
Connecting the Refrigerator to your
Network
1. On your Smartphone, connect to the app store
(e.g. Google Play, etc.).
2. Search for the app using "Samsung E-Smart
Ref." as the keyword.
3. Download the app and install it on your phone.
DA68-02954B-03.indb 23 DA68-02954B-03.indb 23
4. Launch the app. The network confi guration
screen appears.
5. Confi gure the AP information (SSID, Password,
etc.) on the app screen.
6. Confi gure the network settings according to the
instructions in the app.
7. On the refrigerator, press and hold the Fridge
and Energy Saver buttons at the same time
for 3 seconds. The refrigerator enters the AP
mode.
8. If you have completed the network settings
properly, the app shows the home screen.
• Please confi rm your the Internet devices (AP,
Smartphone) are working properly before
confi guring the network settings.
- This refrigerator supports the IEEE 802.11
a/b/g/n protocols.
Samsung Electronics recommends IEEE
802.11n.
- To connect the refrigerator to a wireless
network, you have to connect the refrigerator to
an AP (router or modem).
If the AP supports DHCP, you can connect the
refrigerator to the Internet using DHCP or a
fi xed IP address.
- Set the channel of the AP to one not currently
being used.
If the channel set for the AP is being used
by another device nearby, it may result in
interference.
- Most wireless networks allow you to confi gure
network security settings.
If your network has a security password, you
must enter the password to connect to the
network.
• The refrigerator supports the following wireless
security modes and encryption types:
- Security Mode: WEP, WPAPSK, WPA2PSK
- Encryption Type: WEP, TKIP, AES
(WPA2PSK and AES are recommended.)
English - 23
2015. 2. 10. 2015. 2. 10. 3:38 3:38