Publicidad
Idiomas disponibles
Idiomas disponibles
Initial Startup
GEMINI R
When starting the GEMINI R rotating laser up for the first time, charge the integrated set of
rechargeable batteries (4.8 V) using the charger supplied. The charger socket is located below
the handle, behind a rubber cap. The set of batteries is fully charged when the green LED on
the charger lights up.
Important!
Only use the charger supplied.
IR remote control
Insert the 2 batteries supplied (type AAA) in the IR remote control.
Ensure pole direction is correct!
Receiver
Insert the battery supplied (type 9V) in the receiver.
Ensure pole direction is correct!
Starting up the unit
When using on site, set up the GEMINI R according to the application.
Self-levelling
The GEMINI R has a self-levelling feature.
This self-levelling feature is switched on by
pressing the ON/OFF button. The horizontal beam
(H) starts to rotate and the plumb beams (L
L
) are switched on.
2
If the unit is placed in a slanted position of up to 5°
in any direction, the laser beams are plumb and
horizontal.
If the 5° range is exceeded, the horizontal beam
stops rotating and starts to flash together with the
two plumb beams (L
Operating Instructions GEMINI R Rotating Laser
and L
).
1
2
and
1
EN
7
Publicidad
