Denon DCD-695 Instrucciones De Operación página 13

ENGLISH
REMOTE CONTROL UNIT RC-241
Setting to the Program Mode
e For program search, press the PROG button
then the number buttons (1 through 10 and
+10).
The remote control unit is normally set to the
direct mode.
(& OPEN/CLOSE)
Program Button (PROG)
Call Button (CALL)
Volume Button The level of the Output Terminal
(a) output can be varied.
Pressing the (4) button in-
creases the volume and pressing
Volume Button the (Ww) button decreases the
Play Button ( » PLAY )
Pause Button ( Il PAUSE )
Stop Button ( Hi STOP)
Auto Space Button (A. SPACE)
Manual Search Reverse Button ( 44 )
Manual Search Forward Button ( DP )
Checking Programmed Contents
By pressing the CALL button on the remote control
unit, programmed contents will be displayed.
Tracks entered into the memory, will be displayed
starting from the first track entered, and will
advance one step at a time each time the CALL
button is pressed.
Repeat All Tracks Button (ALL)
Press this button to repeat playback of all tracks.
When this button is pressed, [REPEAT | lights on
the display and all tracks on the disc or in a
program will be repeatedly played back. Press
this button once more to disengage the Repeat
All function.
REMOTE CONTROL UNIT
(wv) volume.
A-B Repeat Button (A-B)
Repeat All Tracks Button (ALL)
Automatic Search Forward Button ({ PPI)
Automatic Search Reverse Button ( I€q )
Track Selection
Use the numeric track buttons (1 ~ 10 and +10)
while programming and to access a desired track
almost instantly.
The track search buttons ( I€q and Ppl) are best
used to advance or return from the current track to
the next track.
e A-B Repeat Button (A-B)
Repeating playback of a desired interval
1. Start playback and press the A-B button when you reach
the starting point of the interval. The indicator
starts blinking.
. Continue playback or advance the pickup using the
Automatic search forward button { PPI) or manual
search forward button { PP ) until the ending point is
reached. Then press the A-B button once more. The
indicator will light.
The pickup will now return to the starting point and
repeat playback of the selected interval.
This interval will be repeated until the A-B repeat mode
is cancelled by pressing the A-B repeat button. The
indicator goes out.
A-B repeat playback is not possible during programmed
playback.