Aiwa Z-L30 Manual De Instrucciones página 14

Up to 30 tracks can be programmed from any of the inserted
discs.
Use the remote control.
1
2
3
Press PRGM while pressing SHIFT in stop mode.
"-–"
is displayed .
Press one of DISC DIRECT PLAY 1-5 to select a
disc.
To select disc 4 or 5, press DISC DIRECT PLAY 4 or 5 while
pressing SHIFT.
Go to the next step when the tray stops rotating.
Press numbered buttons O-9 and +1 O to program
a track.
Example:
To select the 25th track, press +1O, +1O and 5.
To select the 10th track, press +1O and O.
Selected track number
Total number of selected tracks
To
check the program
Each time 44 or - is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press CLEAR in stop mode.
To
add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REPEAT
repeatedly while pressing SHIFT until CL appears on the display.
During programmed play, you can not use random play, check
the remaining time or select a track.
. "FULL" is displayed if you attempt to program more than 30
tracks.
Program' number Total playing time of the
selected tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press *to start play.
14
ENGLISH