Publicidad
Idiomas disponibles
Idiomas disponibles
w
Setting this unit to power economizing
mode
consumption as follows.
reduces power
When the power is turned off, all the display lights turn off, and
only the &3TANDBY/ON
indicator lights.
However, if the clock is not set, the game Demo (page 8) will
begin when the power is turned off.
If CD or Tape does not play for 10 minutes or if there is no
audio input from any connected external equipment
for 10
minutes when VIDEO/AUX or PHONO is selected as the source,
the power shuts off.
The display brightens only when operating the unit. When the
unit has not been used for 10 seconds, the brightness level
switches to the mode previously selected in "DIM MODE". (Page
6)
(If the display
brightness
level is set to "DIM-OFF",
the
brightness does not change. When the level is "DIMMER 3",
the button lamps are also turned off.)
1
2
3
Press ECO.
"ECO MODE" will be displayed.
Press ENTER within 4 seconds.
The current power-economizing mode status will be displayed.
If the power-economizing
mode is OFF: ECO OFF
If the power-economizing
mode is ON: ECO ON
Turn MULTI JOG within 4 seconds to switch the
power-economizing
mode on or off.
Example: When "ON" is selected
The mode will be automatically
set after 4 seconds. It will
also be set if ENTER is pressed within 4 seconds after step
3.
Standby power consumption
[f the power-economizing
mode is OFF: 19.3 W
If the power-economizing
mode is ON: 1.7 W
P %!-.,.'.".!
!?F',...
,!,
='.
!.
,'-!,-,
!,'
...
,'J
4-CHANNEL MULTI-AMPLIFIER SYSTEM
To provide reinforcement for the ultra-low frequencies, in addition
to the Left/Right 2-channel amplifier used to reproduce mid-to-
high-range frequencies, this system incorporates a second UR
2-channel amplifier just for reproduction of ultra-low frequencies
— making it, in effect, a 4-amplifier system. By utilizing discrete
amplifiers for mid to-high-frequencies
and low frequencies, high-
quality sonic reproduction that is virtually free from distortion can
be realized.
This Multi Amplifier System, which utilizes independent circuitry
for the different
frequency
ranges,
enables
superb
sonic
reproduction free from distortion.
BUILT-IN SUBWOOFER SYSTEM
The built-in subwoofer System has a separate subwoofer cavity
area that is part of the loudspeaker cabinet structure, which acts
as a sonic filter to cut distortion components. (In the Multi Amplifier
System, the ultra-low frequency signals transmitted from their
own independent
amplifier are reproduced in this area.) This
separate
construction
gives a clear, rich definition
to bass
reproduction and it can realize clear, well-defined
mid-to-high
frequency signals.
And AlWA's built-in subwoofer system incorporates a subwoofer
capable of powerful, satisfying bass performance with true stereo
separation.
range frequencies
Subwoofer Cavity area
Amplifiers for Low frequencies
To view the clock when all the display lights turn off, press 1I so
that the time is displayed for 4 seconds.
ENGLISH
7
Publicidad
