Ubermann UID04BRA Manual Del Operador página 26

FEATURES
PRODUCT SPECIFICATIONS
Coupler ...................................................................................1/4 in. Hex
Motor ..................................................................................... 20 Volt DC
Switch ............................................. VSR (Variable Speed Reversible)
ASSEMBLY
WARNING:
If any parts are damaged or missing do not operate this product
until the parts are replaced. Use of this product with damaged
or missing parts could result in serious personal injury.
OPERATION
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when not in
use. Removing battery pack will prevent accidental starting that
could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to comply
with ANSI Z87.1 or equivalent standard, along with hearing
protection. Failure to do so could result in objects being thrown
into your eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories not recommended
by the manufacturer of this product. The use of attachments or
accessories not recommended can result in serious personal
injury.
No Load Speed ....................................................0-2,400 r/min. (RPM)
Impact Speed* ................................................................0-3,100 IPM*
Torque ..................................................................1,750 in.lb. (198 Nm)
* Impacts per minute
WARNING:
Do not attempt to modify this product or create accessories not
recommended for use with this product. Any such alteration or
modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not allow familiarity with products to make you careless.
Remember that a careless fraction of a second is sufficient to
inflict severe injury.
Applications
You may use this tool for the purposes listed below:
• Driving, tightening, and removing screws, nuts, and bolts
Overload Protection
During some applications, the battery electronics may signal
the battery to shut down, and cause the tool to stop running.
To reset the battery and tool, release the trigger and resume
normal operation. Do not force the tool.
High Temperature Protection
Li-ion battery packs are equipped with a high temperature
protection feature that automatically deactivates the tool when
it is overheated. To resume operation, allow the tool to cool and
then squeeze the trigger.
7 — English