Schluter LIPROTEC-PEBZS Instrucciones Breves página 34

3. To select all the connected Bluetooth mesh receivers si-
multaneously, press the
> All the LED modules that are connected to intercon-
nected Bluetooth mesh receivers flash briefly once.
These LED modules can now be controlled jointly.
5.4 Operation using the Bluetooth
remote control
If Bluetooth mesh receivers and the Bluetooth remote control
have been set up and taught, the Bluetooth remote control
can be used to control the system. On delivery, the Bluetooth
mesh receivers included in the set and the enclosed Blue-
tooth remote control have already been taught.
Switching on and off using the Bluetooth remote
control
Option 1: Pressing the
connected to the selected group of Bluetooth mesh receivers
on or off.
Option 2: If the LED modules in a group are switched off, the
entire group is switched on by pressing the corresponding
button (1–4).
Adjusting the brightness
The + and - buttons are used to adjust the brightness of the
Bluetooth mesh receivers in the selected group.
1. To increase the brightness, press the + button.
2. To reduce the brightness, press the - button.
34
button.
button switches all LED modules