Schluter LIPROTEC-PEBZS Instrucciones Breves página 39

LIPROTEC
Teaching new Bluetooth mesh receivers
To teach a new Bluetooth mesh receiver, you have to add the
new Bluetooth mesh receiver to a group » "Adding Bluetooth
mesh receivers to a group" on page 31 .
Teaching a new Bluetooth remote control (without the
app)
Illustrated instructions
1. Disconnect the Bluetooth mesh receiver for which you
wish to teach the remote control from the power supply
(unplug from the mains socket).
2. Reconnect this Bluetooth mesh receiver to the mains sup-
ply (plug it into the socket).
3. Within 20 s, briefly press the
tooth remote control at the same time.
4. Press the
> The status LED of the Bluetooth mesh receiver flashes
while the connection data for the Bluetooth remote
control is being stored in the Bluetooth mesh receiver.
A new Bluetooth remote control adopts existing group
and scene settings. The Bluetooth remote control is
now taught. The Bluetooth mesh receiver can now be
controlled using the newly taught Bluetooth remote
control » "Selecting Bluetooth mesh receivers" on
page 33 . You have to repeat this procedure for each
Bluetooth mesh receiver.
» "I" on page 2
button on the Bluetooth remote control.
and + buttons on the Blue-
EN
39