Installing The Gear Shift Knob; Mounting The Shifter - Thrustmaster TH8A Manual Del Usuario

INSTALLING THE GEAR SHIFT KNOB

1. To screw the gear shift knob (A) onto its stick (B): turn the gear shift knob clockwise.
2. To unscrew the gear shift knob: turn the knob counterclockwise.
TIGHTEN

MOUNTING THE SHIFTER

Mounting is optimized for any type of support:
Tables, desks or shelves from 1 to 55 mm in thickness, via the clamping system (H).
-
- Cockpits, via the built-in "screw threads" (the clamping system is removable).
Mounting the shifter on a table or desk
1. Place the nose of the shifter on a table or other flat surface.
2. To tighten: turn the clamping wheel counterclockwise.
3. To untighten: turn the clamping wheel clockwise.
TIGHTEN
3/18
UNTIGHTEN
UNTIGHTEN