Sleep Mode; Charging The Rechargeable Batteries - Thrustmaster ADVANCE WIRELESS DUAL TRIGGER Manual De Instrucciones

INSTALLATION
1. Remove the gamepad's battery compartment cover.
2. Insert rechargeable batteries, then replace the cover.
3. Plug the gameport receiver (11) into a controller port on your console.
4. Turn on the gamepad using the switch (6).
5. Turn on your console and start up your game.
You are now ready to play!
ADVANCED FUNCTIONS
• Switch (6):
- OFF position = gamepad is turned off.
- VIB LOW position = gamepad is turned on, vibration mode is on low (saves battery power).
- VIB HIGH position = gamepad is turned on, vibration mode is on high (uses more battery power).
• MODE button (7): press this button to switch between modes.
- Analog mode (default): MODE button (7) lights up blue.
- Digital mode: MODE button (7) is not lit up.
• CONNECT button (9): press this button to switch between modes.
- "Connect" LED is flashing quickly = no signal between gamepad and receiver (not connected).
- "Connect" LED is lit up = strong signal between gamepad and receiver.
- "Connect" LED is off = gamepad is in sleep mode.
- "Connect" LED is flashing slowly = low battery power (vibration function will be disabled in order to
save power). In this case, plug in the gamepad's AC adapter to recharge the batteries.

• SLEEP MODE:

- The gamepad automatically turns off when not in use for 5 minutes.
- To "wake" it, press any button.
• MULTIPLAYER / CHANNEL AUTO-SWITCHING INFORMATION:
- You can play with up to 4 Dual Trigger Gamepads. All channels are detected automatically.
- When playing in multiplayer mode, if you wish to switch gamepads in the course of a game, press the
RECEIVER and CONNECT buttons on your gamepad simultaneously.

• CHARGING THE RECHARGEABLE BATTERIES:

- To charge the rechargeable batteries, plug in the gamepad's AC adapter. The CHARGE LED turns
red.
- When the batteries are fully charged, the CHARGE LED turns green.
- Note: you can use the gamepad while it is charging.
TRIGGER MAPPING
All analog buttons and mini-stick directions (axes) can be mapped to the left and right triggers (except D-
Pad and START, SELECT, L3 and R3 buttons).
2/4