Publicidad
Idiomas disponibles
Idiomas disponibles
MENTS
section). Never use wire,
rope, string, etc.
• Use specified trimmer spool. M ake
sure spool isproperly installed and
allparts a re securely fastened.
• Use only Craftsman
(_ replacement
parts a nd accessories
asrecom-
mended.
CUTTING
SAFETY
_.WARNING:
Inspect area to be
cut. Remove objects
(rocks, broken
glass, nails, wire, string, etc.) which
can be thrown or become entangled
in
cutting head.
• Do not overreach
or stand on unsta-
ble support.
Keep firm footing and
balance.
• Keep the cutting head below waist
level. Do not raise handles above
your waist. Cutting head can come
dangerously
close to your body.
• Keep away from cutting head and
spinning
line.
• Use unit properly.
Use only for trim-
ming, scalping,
and mowing.
Do
not force
unit. It will do the job better
and with less risk of injury at the rate
for which it was designed.
• Use only in daylight or in good artifi-
cial light.
MAINTENANCE
SAFETY
_iWARNING:
Disconnect
unit
from the power supply before perform-
ing maintenance,
or when changing
trimmer line.
• Maintain
unit according
to recom-
mended
procedures.
Keep cutting
line at proper length. Follow instruc-
tions for changing
trimmer line.
• Have all service and maintenance
not explained
in this manual per-
formed by a Sears Service
Center to
avoid creating a hazard.
• Never douse or squirt the unit with
water or any other liquid. Clean unit
and labels with a damp sponge.
Keep handles
dry, clean, and free
from oil and grease.
• Keep the air vents clean and free of
debris to avoid overheating
the mo-
tor= Clean after each use.
TRANSPORTING
AND STORAGE
• Stop the unit and disconnect
the
power source when not in use.
• Carry the unit with motor stopped.
• Store the unit so the line limiter
blade (on underside of shield) can-
not cause injury.
• Store unit indoors in a high, dry
place out of the reach of children.
Store unit unplugged.
• Do not hang unit so that the trigger
switch is depressed.
DOUBLE
INSULATION
CONSTRUCTION
This unit is double insulated to help pro-
tect against
electric shock.
Double
in-
sulation
construction
consists
of two
separate "layers" of electrical
insulation
instead
of grounding.
Tools built with this insulation
system
are not intended
to be grounded.
No
grounding
means
is provided
on this
unit, nor should a means of grounding
be added to this unit. As a result, the ex-
tension
cord used with your unit can be
plugged into any standard 120 volt elec-
trical outlet.
Safety
precautions
must be observed
when operating
any electrical
tool. The
double insulation
system only provides
added
protection
against
injury result-
ing from an internal electrical
insulation
failure.
,_WARNING:
All electrical
repairs
to this unit, including
housing,
switch,
motor, locking sleeve assembly,
wires,
etc., must be diagnosed
and repaired
by qualified service personnel.
Re-
placement
parts for a double insulated
appliance
must be recommended
by
the manufacturer.
A double insulated
appliance
is marked with the words
"double
insulation"
or "double
insu-
lated". The symbol (square within a
square)
[]
may also be marked on
the appliance.
Failure to have the unit
repaired by qualified service person-
nel can cause the double insulation
construction
to become ineffective
and
result in serious injury.
SAVE THESE INSTRUCTIONS
Publicidad
