Craft 358.745340 Manual De Instrucciones página 9

5. Insert one end ofthe line about 1/2
inch (1cm) i nto thesmall hole in-
side the spool.
6. Wind the line evenly and tightly
onto the spool. Wind inthedirec-
tion ofthe arrow found o nthe
spool.
7. Push t he line into thenotch, leav-
ing 3to5inches (7- 12cm) u n-
wound.
8. Insert theline into the exit h ole in
thehub asshown i nthe illustra-
tion.
9. Align t henotch w ith the line exit
hole.
10. P ush t he spool into the hub until it
snaps i nto place.
11. P ull onthe line extending outside
thehub torelease itfrom the
notch; otherwise, the unit w ill n ot
function properly.
Spool
Button
Line in Notch
Hub
Line exit hole
USER REPLACEABLE SERVICE PARTS
REPLACEMENT PART
Spool with 0.065 inch Trimmer Line
Assist Handle
Bolt Carriage, 1/4-20
Wing Nut
Shield Assembly
_WARNING: Perform the follow-
PART NUMBER
71-85837
530403805
530403886
530016152
530404076
ing steps after each use.
• Stopthe unit and disconnect the pow-
er source when not in use.
• Carry the unit with motor stopped.
• Store the unit so the line limiter blade
cannot cause injury.
• Store unit and extension cord indoors
in a high, dry place out of the reach of
children. Store unit unplugged.
• Store unit with all guards in place.
Position unit so that any sharp object
cannot accidentally cause injury.