Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning, Care & Maintenance
Routine maintenance
Switch off and disconnect from the power supply before cleaning.
Clean the enclosure and interior of the appliance as often as possible.
Clean the unit with moist cloth. Never allow the switch, control panel, cable or plug to get wet.
Do not use abrasive cleaning agents. These can leave harmful residues. Use only mild soapy
water.
Clean the door seal with water only.
Ensure that no cleaning water penetrates into the electrical components.
Must not be cleaned by a water jet.
Always wipe dry after cleaning with soft cloth.
Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
Take care when cleaning the rear of the appliance.
An agent or technician must carry out repairs if required.
If the appliance is to be left inactive for long periods, unplug the appliance after having turned
the switch to OFF position, empty the refrigerating compartment and clean thoroughly.
Special maintenance
The instructions given in the following paragraph can be followed from qualified technicians
Periodically clean the condenser using suitable tools (vacuum cleaner or soft brushes) can extend
the life of the appliance.
Check that the electrical connections are not loose.
Check that the thermostat and the sensor are in proper working order.
GB
15
P2M035STD - Ver.1.0
Publicidad
