Publicidad
Idiomas disponibles
Idiomas disponibles
GAS COOKTOP INSTALLATION INSTRUCTIONS
(For 30° & 36" Models)
Typical Under Counter Installation of an Electric Built-in Oven with a
Cooktop Mounted Above
PATO Te
All mounting
hardware
must
Side filler panels are necessary
be used to secure the built-in
to isolate the unit from adjoining
oven to the cabinets. Refer to
This cooktop may be
cabinets. Panel height should allow
the
built-in
oven
installation
installed over certain
for installation of approved cooktop
instructions.
built-in electric oven
models. See "Typical Gas Cooktop
models.
Installation Over an Electric Built-in
Oven
Installed Under the Counter" on
next page.
36"
(91.4 cm) Min.
box for built-in oven.
py
Junction box
must be located
approx. 3" to the
left of the built-in
oven
cutout
SS
Use 3/4" (1.9 cm)
plywood, installed on
two runners, flush with
toe plate. Base must be
capable of supporting
a
Unit will
{
150 pounds (68 kg) for
NO
overlap
27" models
and
200
cutout
pounds (90 kg) for 30"
Cut an opening in wood base minimum 4"
Oe
models.
(10.2 cm) x 4
(10.2 cm) to route armored
1" (2.5em)
41/2" (11.4 em)
cable to junction box.
Max.®
*
.
retold dinnctly
CUTOUT DIMENSIONS (INCHES (CM)}
over the oven
OVEN SIZE
E. HEGH
BWIDTH
G. DEPTH
unit, 5" (12.7cm)
Min
maximum
is
:
allowed.
30" (76.2) | 27 Va" (69,.2cm) | 28%" (718) | 2814" (72.4) | 29" (73.7) | 234" (59.7)
27" (68.6) | 27 Ve" (69,2 cm) | 2814" (71.8) | 247/s" (63.2) | 2514" (64.1) | 234" (59-7)
Figure 3
4
Publicidad
