Descargar Imprimir esta página

GE ZET1 Serie Instrucciones De Instalación página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation Instructions
41] Cutout for Single Built-In Oven
Cutout Width
73/4"
zou in
ast
etree 72.7 cml >|
Mex) Junetion
Cabinet Width
30" (76.2 cml
Box Location
(junction box
;
may be located in
Recommended
adjacent cabinet)
Cutout Location
Allow 11/16"
from Floor
32 1/2" (82.6 cm)
(1.75 cm) for
overlap of _| s-opening
| ||
Pa -
Cutout Depth
23: 1/2" (59.7 cm) Min.
side edges
etween
I
id
n
*
n
*
of cutout
Walls Must
3 U4 Min,
22'(559eml
Cutout Width
28 1/2" (72.4 cm) Min.
se | |] EER] encom a
285/8 (72.7 cm] Max.
(72.4cm)
Ade
i
Wide
Sa
t
Cutout Height
27 1/4" (69.2 cm} Min.
av
=
ee
NS
27 5/16" (69.4 cm) Max.
(S3.3cm)
.
es
Allow 1" (2.5 cn):
'
(fr
-...
minimum for
overlap of oven
top and 1%'
(3.2 cm} overlap
of oven bottom of
—— ~~ cutout
Cabinet
Width
Allow a minimum
of 21" (53.3 cm) for
clearance to adjacent
corners, drawers, walls,
etc. when
door is open
30" (76.2 crm
ey
Recommended cutout
location from floor 32
1/2" (82.6 cm)
a
If the cabinet does not have a solid bottom, two
braces or runners must be installed level with
the bottom of the cutout to support the weight
of the oven. For single ovens, the runners and
braces must support 200 Ibs. (90 kg).
NOTE: If marks, blemishes or the cutout
opening are visible above the installed
oven, it may be necessary to add wood
shims under the runners and front trim
until the marks or opening are covered.
Suitable
Bracing
Side by Side Installations
Install two wall ovens in separate cutouts.
Allow 2" (5.1 cm) min. between cutouts.
Cutout -
2" (5.1 cm]
Cutout -
Observe all
Min.
Observe all
dimensions |
®)
dimensions
and
and
requirements.
requirements.
Runners
to Support
NOTE: If the cabinet does
not have a front frame and the
sides are less than 3/4" (1.9 cm)
thick, shim both sides equally to
establish the cutout width.
&
¢
Installa
solid bottom
or 2" x4'
(5cmx 10 cm) or
equivalent runners
level with bottom
of cutout
tel
\\
(54.9 cm}
Over Centerline
of Cabinet
The solid bottom or runners must be level with
the bottom of the cutout, or the bottom trim
may not install correctly and then interfere
with the door opening.
This oven is not approved for stackable
installation.

Publicidad

loading

Este manual también es adecuado para:

Zet2 serie