CEMO DT-Mobil Easy 210l Manual De Instrucciones página 33

5.2.5 Filling
Ensure that the tank is horizontal and adequately
secured!
Fire, naked flames and smoking
prohibited
Check the contents of the tank using the
fill level indicator.
Important:
Danger of electric shock!
Ensure electric cables/connections are
clean and dry.
i
Important:
Set the switch of the pump to 0 (off) before
connecting the power source.
1. Open the lid of the DT-Mobil.
2. Connect the terminal clamps D to a suitable
voltage source (see tank or pump type plates).
Observe the colour coding:
• red = positive terminal (+)
• black = negative terminal (-)
Switch on pump E at the switch.
3. To fill, remove delivery nozzle F from the
holder and fully insert the delivery spout into
the container/tank to be filled.
4. Operate automatic delivery nozzle F (if nec-
essary, lock with locking device) and carry out
the filling operation.
Tank ventilation and pressure relief are performed
automatically by the integrated valve C. For larger
delivery quantities, filling opening C should also
be opened.
i
Important:
Constantly monitor the filling process.
5. Close the automatic delivery nozzle F and
allow the fuel to drip off.
6. Switch off pump E.
7. Completely disconnect the pump from the
power source and roll up the cable.
8. Insert the hose and nozzle into the integrated
holder.
9. Close the lid of the DT-Mobil.
6 Accessories
The following accessories are available for DT-
Mobil Easy and DT-Mobil PRO PE:
6.1 Hinged cover as lockable protec-
tion for the fittings
DT-Mobil Easy 210l:
DT-Mobil Easy 440l,
Combi 440/50l and Pick-up 210l: Order no. 11057
6.2 Level indicator
DT Mobil Easy Pick-up 210:
DT Mobil Easy 440:
DT Mobil Easy COMBI 440/50
and 440 Basic/Premium:
6.3 Flow meter K24, diesel
GB
Order no. 11062
Order no. 11256
Order no. 11058
Order no. 11059
Order no. 11111
33