1. Put the hose clamp overthe end of the auto-pump drainage hose by squeezing the 2 tabs of the clamp together, this willopen the clamp to slide onto the hose.
2. Push the drainage hose over the auto-pump drainage outlet.
3. Push the hose clamp over the outlet to secure the hose.
4. Put the drainingend of the hose over any suitable area where water can be emptied:a sink,drain or window. Be sure the water flows awayfrom the buildingor any other
objects that could be damaged.
Note: The draining hose must not be put more than 10 feet above the floor on which the unit is standing.
AUTO-PUMP ,SYSTEM
Electrical plug
1. Put the hose clamp overthe end of the auto-pump drainage hose by squeezing the 2 tabs of the clamp together, this willopen the clamp to slide onto the hose.
2. Push the drainage hose over the auto-pump drainage outlet.
3. Push the hose clamp over the outlet to secure the hose.
4. Put the drainingend of the hose over any suitable area where water can be emptied:a sink,drain or window. Be sure the water flows awayfrom the buildingor any other