Publicidad
Idiomas disponibles
Idiomas disponibles
HARDWARE CONTENTS
•
I~
D
>
Phillips screw
IE&
E&l
Anchor
A
Oty. 2
. . SAFETY INFORMATION
Qty. 2
Transformer
mounting template
Qty. 1
Please read and understand this entire manual before attempting to assemble, operate or install
A
the product.
. . WARNING
• For use with low-voltage landscape lighting systems only.
• Risk of electric shock.
• To reduce the risk of fire or injury, turn off/unplug and allow to cool before replacing bulb.
• Install all luminaires 10ft. or more from a pool, spa, or fountain.
• Lamp gets hot quickly. Contact only switch/plug when turning on.
• Lighted lamp is HOT Keep lamp away from materials that may burn.
• DO NOT touch hot lens, guard, or enclosure.
• DO NOT operate the luminaire fitting with missing or damaged parts.
• This power pack is for use with low-voltage landscape lighting systems ONLY.
• Suitable for use with submersible luminaries and pumps.
• DO NOT mount power pack indoors or in an enclosed area, including garages, crawl spaces or
beneath ground level decks.
• Do not exceed the maximum wattage of the power pack's terminals (120 watts).
• ONLY plug the power pack cord into a covered 120-volt Class A Type GFCI (ground fault
circuit interrupter) receptacle with a hooded flush-type cover plate marked "WET LOCATION."
CAUTION
• This product is not a toy and must not be operated by children.
• Turn off electricity at main fuse box (or circuit breaker box) before beginning installation
by switching circuit breaker off or removing fuse.
• Do not connect this fixture to an electrical system that does not provide a means for equipment
grounding.
• Do not submerge in water. The product can be damaged.
• Always disconnect the power pack from the electrical outlet when working on the lighting system.
• The device is a certified component of a landscape lighting system where the suitability of the
combination shall be determined by UL or other inspection authorities having jurisdiction.
CALCULATING LIGHTING CAPACITY
The 120W power pack has a 120-watt circuit. To determine the maximum number of fixtures that
can be safely connected to this power pack, add up the individual wattages of all the fixtures. The
total wattage of your fixtures must not exceed 120 watts.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 90 minutes
Tools required for assembly: Drill bit, drill (not included)
Lowes.com/portfolio
lfe]:ilfe]i[e
J
3
Publicidad
